General Technical Information

Unique knowledge accompanies every order

To achieve the best results in the printing process or in packaging manufacture, you need not only a high quality base material, but also knowledge about how to use that material in the best possible way. Brand owners, designers, packaging developers and printers all contribute their own specific knowledge and experience to help optimise the product’s properties and functions throughout its lifespan. For this reason, hands-on knowledge about the special properties of paperboard is also required.

Our service offer

All sales of Holmen Iggesund’s products in Europe are coordinated at our sales office in Amsterdam. We also have sales offices in Singapore, Hong Kong, Japan
and the United States. We have organised our people, technology, and systems to suit your priorities and offer complete commercial and technical customer support.
We know that customers’ needs constantly evolve, and market conditions are ever-changing.

The service we provide is based on some simple principles:

• Locally based account managers and technical service managers. Account coordinators in the sales office in Amsterdam speak different European languages.
  
  
• Sheeting facilities close to our main markets, as well as at our mills, ensure the rapid delivery of small orders.
  
  
• Storage facilities close to our customers.
  
  
• A wide network of selected merchants supplement the sales network.

Quality assurance

We have implemented Quality Assurance Systems to maintain our product quality and to meet customer needs and expectations. At our mills we have certified quality assurance systems in accordance with ISO 9001. We welcome customer audits to approve and further develop our quality system. Product specifications and contracts are essential elements for ensuring that we have agreements between our customers and ourselves, which meet the need for clear, joint understandings about product quality. We believe that quality has a broader meaning and includes how the paperboard is made and how it impacts our planet. Therefore, our paperboard is also certified according to ISO 14001 and ISO 45001.

Accredited laboratory

Our Laboratory for Sensory and Chemical Analyses is accredited for sensory measurements by the Swedish National Accreditation Authority, SWEDAC. This guarantees that tests are objectively carried out using approved and tested methods. The laboratory performs sensory analysis using statistical evaluation and chemical analysis using a gas chromatograph and mass spectrometry. It has unique equipment for taking gas samples at room temperature and has developed methods for measuring the effects of aromas on packaging material/permeability. Please note that the chemical analyses are not accredited. The laboratory safeguards the taint and odour neutrality of raw materials, the baseboard and the final products. Third parties often consult the laboratory when investigating taint and odour problems.

_{Accreditation number: 1740 ISO/IEC 17025.}

Product safety

The essential purpose of packaging is to ensure the hygiene and quality of the packed product. We control the entire pulp and paperboard chain production so that we can supply paperboard products which meet strict standards for hygiene, barrier functions, and taint and odour neutrality. All materials used in the making of our board are approved for food contact in accordance with current regulations in different countries. To ensure that we are providing the correct product and product safety documentation we must know the intended final application. If your specific applications require productsafety certificates or if further information is needed, please contact your local Technical Service Manager

Compliance, accreditations and awards

Packaging in general, paperboard and paperboard-making processes are all subject to environmental attention. As a paperboard supplier, we take responsibility for the environmental impact of our products all the way from the sourcing of raw materials through our manufacturing processes.

Environmental management systems are implemented at all our mills (ISO 14001). The Holmen Group’s forest management routines are approved in accordance with the FSC^® (C110018/C008588) and PEFC™ (PEFC/05-33-105) standards as well as certified in accordance with the ISO 14001 standard. Both our mills hold chain of custody certifications (CoC) in accordance with FSC^® and the Iggesund Mill also holds CoC certification with PEFC™. This enables our certified customers to be part of the chain. . Our aim is that our processes will meet environmental requirements with good safety margins and we ensure that our products are safe for handling and use. Both mills operate in accordance with the energy management system standard ISO 50001 and the safety management system ISO 45001.

Packaging waste and associated landfill issues are of major concern in some countries. For a long time, used paper and paperboard have proven to be easy to recover – both as a raw material for recycled fibre products and also for energy recovery.

Holmen Iggesund’s energy use is based on biofuels and we have initiated programmes to further reduce the use of fossil fuels, thereby reducing fossil carbon dioxide emissions.

Paperboard has a low carbon footprint compared to other packaging materials. The raw material, timber, is harvested from managed forests that absorb carbon dioxide and emit oxygen. We measure our carbon footprint according to CEPI guidelines and updated data can be found at iggesund.com/certificates.

Holmen has reported to the CDP Climate Program since 2007 and also to the CDP Forest Program since 2013. Surveys over the years have shown that Holmen has good management in place and a strategy to reduce the negative impacts of climate change. In the evaluation of forest management, Holmen has been placed in the group for good leadership that ensures sustainable use of the forest’s resources for several years now. In the 2021 results, Holmen scored highly in two categories: Climate Change A- and Forests A-.

The Holmen Group has been part of the UN Global Compact and its corresponding Nordic network since 2007. Each year the group reports its sustainability work according to the ten principles of the Global Compact. The principles relate to human rights, social conditions, the right to establish trade unions, environmental responsibility and anti-corruption.

As members of the UN Global Compact, Holmen annually reports a “Communication on Progress” (COP) that describes how its work with Global Compact’s principles for responsible business practice is progressing.

Twice in the last decade, Holmen has been included in the Corporate Knights index over the 100 most sustainable companies in the world, Global 100.

The Carbon Disclosure Project (CDP) is the name of an international federation that in 2016 represented 827 institutional investors with assets totalling around SEK 900 billion. CDP seeks to encourage companies around the world to reduce their impact on the climate and nature’s resources, and it presents an annual report on the outcome of its work. As a result of its energy investments and the consequent fall in carbon dioxide emissions in 2014, Holmen qualified for the A list on the Climate Performance Leadership Index. The global index lists 187 companies that have been shown to have an excellent strategy for reducing climate change.

For a complete and updated list of certificates, go to iggesund.com/certificates.

Sustainability the Iggesund way

The overall picture

Invercote, Incada and Inverform, the three paperboard families manufactured by Holmen Iggesund, meet a very high standard from a sustainability viewpoint. They are produced in modern, efficient mills that operate largely on bioenergy. From a wider perspective, it is also obvious that the raw material is renewable and the products are well suited to recycling.

In the European recycling system over 70 per cent of paper-based products are collected and recycled as material or bioenergy.

Responsible use of resources

At Holmen Iggesund’s mills almost 100 per cent of the wood raw material is used. What does not become paperboard becomes energy. Both mills have minimal amounts of waste that goes to landfill – over the years the company has found applications for all the fractions previously considered to be waste.

Transparency

Holmen Iggesund is part of the forest industry group Holmen, which has repeatedly been singled out by various institutions as one of the world’s 100 most sustainable companies and a role model in fighting climate change. An extensive sustainability audit enables all stakeholders to inspect in detail how the group, and thereby also Holmen Iggesund, performs. The sustainability audit is done in accordance with the guidelines set by the Global Reporting Initiative (GRI).

The ultimate transparency is created when our customers and the general public are able to roam freely in our forests and see with their own eyes how they are managed.

The most sustainable material system

Paperboard and paper products are included in a material system in which paper is collected after its primary use, is recycled and can be used again. Perhaps not always in the same applications as the primary fibre but there are many sensible applications for recycled fibre-based material.

However, primary and recycled fibres are not two separate systems. On the contrary, they are mutually dependent. If the inflow of primary fibre ceases, the industry that lives on recycled fibres starts to experience disruptions after only a few months. According to the consulting firm McKinsey, the large-scale addition of primary fibres is required to maintain the quality of the global recycled fibre pool.

You can read more about environmental issues at iggesund.com/sustainability and about our social, financial and environmental responsibility in the Annual Report at holmen.com.

Recommendations to printers/ converters

Before printing

The paperboard is identified by the order number and the pallet or reel number. It is essential that these numbers are recorded to provide identity and traceability throughout printing, conversion and use.

During printing/converting

The moisture-proof wrapping must not be removed until the board has attained the temperature of the environment concerned (printing room, etc.)

 

For food packaging and applications, we recommend you remove the outer layer of the reel before printing in order to avoid contaminated board.

When cold paperboard is exposed to a warm environment, the air adjacent to the board can be cooled below its dew point (point of condensation) and this moisture is then absorbed by the board. The time for temperature equilibrium to be established varies depending on the temperature difference and the weight of the board (pallet or reel). Therefore, the wrapper should never be removed before the board has reached the temperature in the printing room.

Recommended climate in the printing/converting room to prevent curl and/or misregistration is 45–60% relative humidity and a temperature of 20–23°C.

The moisture content of paperboard can rise as a result of its exposure to air at high relative humidity, during periods of wet weather. It can also occur as a result
of the condensation effect in cold weather discussed above. Moisture absorption can cause waviness at the edges of the sheets and a general tendency is for upcurl, i.e. curl towards the printed surface for high quality sheet fed paperboard. For offset print, please be aware that misregistration may occur together with press misfeeding, wasted sheets and loss of output and efficiency.

The moisture content of paperboard can fall as a result of its exposure to air at low relative humidity. This can occur during very dry weather and also occur in centrally heated buildings when the external air is very dry and very cold. A paperboard which is too dry may also become wavy, develop downcurl, i.e. curl towards the reverse side of the board and become brittle. These features can cause misfeeding and it will be difficult to crease the board satisfactorily.

Avoid rubbing or touching the surface of extruded/ laminated board because the corona treatment can be easily damaged.

 

 

 

After printing/converting

Paperboard in sheet form should be rewrapped with moisture-proof material after printing.

Rewrapping is particularly important to ensure good register when board is printed in two or more passes through the printing press. It is also important to wrap in this way to achieve good register between the print and the next process, for example, cutting and creasing, guillotining or bookbinding.

Paperboard products should be wrapped in moisture-resistant material after conversion and prior to shipment to the customer (end user) or to further conversion operations.

Recommendations to end users

Before use

The supplier’s order number identifies the material. Should subsequent traceability be necessary, we recommend that you record this number and maintain the identification of the material.

Unpacking/Storage

The end user should also observe the precautions regarding the achievement of temperature equilibrium prior to unwrapping and use. See warming up timetable on the previous page. Unused material should be rewrapped.

The end user should rewrap any unused material to avoid an extended period of exposure to the atmosphere in the work environment. Some end users, as a consequence of their process, may have environments that are either excessively damp or excessively dry compared with the acceptable range of 45–60% relative humidity, and in such conditions there would be a tendency for the board to either gain or lose moisture with a consequent change in shape or loss of flatness.

Recommended time limit for board in storage

Holmen Iggesund has chosen raw material, chemicals and processes that support stability and long lifetime of the manufactured products, without deterioration of the board properties. However, even if the board is correctly handled, optical as well as physical properties may change with time.

Holmen Iggesund recommends a maximum 1 (one) year time limit, from delivery, for board in storeage. For plastic coatings and laminations see specific recommendations in sections “Plastic coatings” and “Foil and film laminates”.

Please contact your Technical Service representative for advice about the possibility of using board beyond the recommended maximum time limit.

Iggesund Mill and Strömsbruk

 

Reel joins are marked by two arrows, above and below each join.

Standard joins are made with a yellow non-printable splicing tape. The tape width is 50 mm and the thickness is typically 0.19 mm. The adhesive is pressure sensitive providing a high cohesive strength. Joins are butt joins with no overlap and are made with a single cross direction (CD) strip of tape on both sides of the board. Machine direction (MD) strips are added on the print side. Other types of tape are available upon request. Please contact your Holmen Iggesund representative.

Workington Mill

 

Reel joins are marked by a black cross, centred over each join.

Joins are made with a black printable and repulpable splicing tape. The tape is 75 mm and the thickness is typically 0.1 mm. The adhesive is pressure sensitive giving a high cohesive strength. Joins are butt joins with no overlap and made with a single CD strip of tape on both sides of the board (note: MD straps are not added).

Solid Bleached Board (SBB, GZ) Multiply construction, Invercote

 

SBB is made exclusively from bleached chemical pulp. It usually has a pigment coated top surface and can also be pigment coated on the back.

Folding Box Board (FBB, GC2) Cream back, multiply construction, Incada

 

FBB, cream back, is made from layers of mechanical pulp sandwiched between layers of bleached chemical pulp.

Folding Box Board (FBB, GC1) White back, multiply construction, Incada

 

FBB, white back, is made from layers of mechanical pulp sandwiched between layers of bleached chemical pulp. The top layer is pigment coated. The back is thicker than FBB, cream back, and can also be pigment coated.

Solid Bleached Board, Uncoated (SBB, UZ) Multiply construction, Inverform

SBB is made exclusively from bleached chemical pulp.

Bending

Bending stiffness, bending resistance and bending moment, see Stiffness.

Brightness

See Optical properties.

Caliper

See Thickness.

Cobb test

See Water absorption.

Colour

See Optical properties.

Gloss

The gloss of the paperboard surface is measured in accordance with ISO 8254-1¹⁾. The gloss is expressed in % units. The surface of the board is illuminated at an angle of 75° and the reflection from the surface is recorded by a photoelectric cell.

Within Holmen Iggesund a surface having a measured value < 40% board gloss is regarded as matt. A medium gloss board is in the range of ≥ 40% to < 70%, and a high gloss board has a value of ≥ 70%.

_{¹⁾ ISO = International Organization for Standardization.}

Grammage

The grammage of the paperboard is assessed in accordance with ISO 536¹⁾. Grammage expresses weight per unit area and is measured in g/m².

_{¹⁾ ISO = International Organization for Standardization.}

Ink absorption

Ink absorption is measured using an internal test method. The ink absorption is expressed in % units. A specific ink is applied to the paperboard surface. The amount of ink absorbed in a given time is assessed by % reflectance compared with the unprinted surface.

Interlayer strength

See Ply bond.

Moisture content

The absolute moisture content is measured in accordance with ISO 287¹⁾. It is expressed in % of the paperboard weight. The moisture content of the board is measured continuously on the board machine and recorded.

_{¹⁾ ISO = International Organization for Standardization.}

Opacity

The opacity of the paperboard is assessed in accordance with ISO 2471¹⁾. The measuring principle is based on comparison of reflectance for a single paperboard sheet over a black background compared to an opaque pack of paperboard samples. Opacity is expressed in % units and readings close to 100 mean there is no show-through.

_{¹⁾ ISO = International Organization for Standardization.}

Optical properties

The term whiteness is often used as a comprehensive expression for some of the optical properties of the surface of paperboard, although whiteness is also a specific value that is measured today. The properties quoted here are CIE-whiteness, Brightness and Colour. Where paperboards include fluorescent whitening agents or FWAs (sometimes referred to as optical brightening agents or OBAs) measurements are made using an illuminant that contains a controlled element of ultra violet (UV) light. All values are measured both at Iggesund Mill and Workington Mill using Datacolor Elrepho instruments.

Optical properties, CIE-whiteness

CIE-whiteness (W) is a comprehensive term used to express the visual impact of near white surfaces by means of a single value. This value, based on CIE (Commission Internationale de l’Eclairage) tristimulus values, describes perceived whiteness in outdoor UV-rich illumination. A large number of equations have been developed to calculate whiteness, but CIE-whiteness is perhaps the most commonly used. CIE-whiteness is measured in accordance with ISO 11475¹⁾.

_{¹⁾ ISO = International Organization for Standardization.}

Optical properties, ISO Brightness

This is the diffuse blue reflectance factor measured at an effective wavelength of 457 nm. As the measurement is only carried out in the blue region of the spectrum, it is of limited usefulness. ISO Brightness is measured in accordance with ISO 2470-1¹⁾.

_{¹⁾ ISO = International Organization for Standardization.}

Optical properties, Colour

To quantify the impression of colour to the human eye of a nearly white surface, the CIE colour space can be used. Three reflectance figures L*, a* and b* known as the CIELAB coordinates are measured using a standard light source. The coordinates a* and b* measure colour. Positive figures for a* express redness, negative figures greenness, and positive figures for b* express yellowness, negative figures blueness. L* is a percentage which measures luminance on a scale where black is zero and pure white is usually 100%. Colour is measured in accordance with ISO 5631-2¹⁾.

_{¹⁾ ISO = International Organization for Standardization.}

 

Ply bond

The interply or interlayer strength of the paperboard is measured in accordance with ISO 16260¹⁾. Ply bond is measured using a Scott Bond type tester and is expressed in J/m².

_{¹⁾ ISO = International Organization for Standardization.}

Smoothness

See Surface roughness.

Stiffness

A number of methods of measuring stiffness are recognised. Values for the following methods are quoted in this catalogue:

• Bending stiffness L & W 5°
• Bending resistance L & W 15°
• Bending moment Taber 15°

Since the stiffness is related to the orientation of fibres in the sheet during manufacture, two values are given: for the machine direction (MD) and the cross direction (CD).

Stiffness, Bending resistance L & W 15°

Bending resistance is measured in accordance with ISO 2493-1¹⁾. The bending resistance is expressed in mN.

_{¹⁾ ISO = International Organization for Standardization.}

Stiffness, Bending stiffness L & W 5°

Bending stiffness L & W 5° is measured in accordance with ISO 5628¹⁾, DIN 53 121²⁾. The bending stiffness is expressed in mNm.

_{¹⁾ ISO = International Organization for Standardization. / ²⁾ DIN = Deutsche Industrie-Norm.}

Surface pH

Surface pH is measured on a water extract. It is expressed in pH units on a scale of 0 –14.

The pH scale.

Surface roughness

Surface roughness is measured in accordance with ISO 8791-4¹⁾, using the Parker Print Surf (PPS) roughness tester at 1000 kPa using a soft backing (S10). The surface roughness is expressed in μm. Lower results indicate smoother surfaces. Uncoated surfaces are measured using the Bendtsen method and the roughness is expressed in ml/min. Lower results indicate smoother surfaces.

_{¹⁾ ISO = International Organization for Standardization.}

Surface strength

The surface strength is measured in accordance with ISO 3783¹⁾. The strength is expressed in m/s. This test evaluates the ability of the surface to withstand picking and blistering and is carried out using an IGT Printability Tester using a medium viscosity oil. Where strength is expressed in N/m the following correlation applies.

_{¹⁾ ISO = International Organization for Standardization.}

Relation between the unit of measurement for IGT-values.

Surface water absorption

See Water absorption.

Taint and odour

Taint and odour are assessed by members of trained panels who assign numerical ratings and record their impressions of tainting flavours or volatile smells experienced. All our paperboard products are tested by the Robinson taint test based on DIN 10 955¹⁾.

GC (Gas Chromatographic) and Mass Spectrometer methods are used for assessing and identifying paperboard components and those arising from printing and conversion processes.

Our laboratory for sensory and chemical analyses is accredited for sensory analyses with the accreditation number 1740. Accredited laboratories are appointed by the Swedish Board for Technical Accreditation (SWEDAC).

_{¹⁾ DIN = Deutsche Industrie-Norm.}

Tearing resistance

The measured force required to tear a paperboard sheet is given for machine direction (MD) and cross direction (CD) respectively. Tearing resistance is measured in accordance with ISO 18522¹⁾ (Iggesund) and ISO 1974¹⁾ (Workington) and is expressed in mN.

_{¹⁾ ISO = International Organization for Standardization.}

Tensile strength

The tensile strength is the force required to rupture a strip of paperboard. Values are given for machine direction (MD) and cross direction (CD) respectively. The tensile strength is measured in accordance with ISO 18522¹⁾ and is expressed in kN/m.

_{¹⁾ ISO = International Organization for Standardization.}

Thickness

The paperboard thickness is measured in accordance with ISO 534¹⁾. The thickness is expressed in μm. Caliper (pts) is also recorded for reference on specification sheets, where pts are inches/1000.

_{¹⁾ ISO = International Organization for Standardization.}

Water absorption, Cobb test

The surface water absorption is measured using the Cobb test in accordance with ISO 535¹⁾. The water absorption is expressed in g/m².

_{¹⁾ ISO = International Organization for Standardization.}

Water absorption, Wick test

Water absorption at the paperboard edge is measured using a Wick test. The paperboard surface is sealed with waterproof tape on both sides. The sample is weighed, placed in water at 80°C for 20 minutes and reweighed. The amount of water absorbed by wicking is expressed in kg/m².

Whiteness

See Optical properties.

Wick test

See Water absorption.

Product performance

Demands for promotion and protection define the performance characteristics of paperboard, as do the requirements during conversion and distribution. The overall demand for minimum use, resource efficiency, competitive products and efficient systems requires paperboard with high performance combined with fitness for use. Holmen Iggesund products are developed to provide high performance for specific uses. In marketing, sales and technical service, fitness for use and performance requirements are matched to ensure efficient solutions in every case. More information is available in the Paperboard Reference Manual.

Standard product specification and traceability

All products are manufactured to meet the specifications as described at iggesund.com/products. Review of the specifications is documented and performed according to the procedures in the Quality Management Systems within Holmen Iggesund.

The correct application of specification tolerances provides the printer, converter and ultimately the end user with the assurance that the paperboard supplied has been produced under carefully controlled conditions to meet market quality requirements. In the manufacture of its products, Holmen Iggesund continuously strives to minimise deviations from specified target values. To meet our customers’ demands for quality and consistency, we also specify upper and lower tolerances as appropriate. In the control of product quality, Holmen Iggesund uses online as well as laboratory measurements to monitor according to documented procedures.

Our guarantee

Holmen Iggesund guarantees that the material our customers receive has been assessed by sampling using both online and laboratory techniques. Quality parameters and all sample measurements are based on samples taken from board production and have been found to be within the published and agreed tolerances as detailed in the current edition of the Paperboard Product Catalogue that can be found at iggesund.com or approved amendment. We strongly recommend fully testing the product at every stage through the supply chain before going into full production. Your local Technical Service contact should be involved to achieve maximum product performance.

In situations where there are doubts about the performance of the paperboard or compliance with the specifications, tools are available to trace information related to the product and/or order. The Holmen Iggesund document Terms and Conditions of Trade 2022 constitutes the whole agreement between Holmen Iggesund (Seller) and the Buyer and here it is stressed that in the case of a claim, the clear identification of the goods is a requirement. This is to enable above mentioned traceability to relevant product data. For the customer, the key to traceable information is the order number and package number as this information is the link to all product data and laboratory and machine records. Retrievable data are stored for a minimum of two years. Procedures and systems are in place to achieve the necessary traceability back to Holmen Iggesund’s suppliers.

Taint and odour neutrality

The Swedish Board for Technical Accreditation has accredited our laboratory for sensory analyses. Measurements are made under the auspices of a government agency and with the obligation to be impartial, making this the most stringent form of quality assurance. Most countries in the world accept test results that have been carried out at accredited laboratories and these can therefore be compared. To ensure that our paperboard meets the demands for taint and odour neutrality, we regularly monitor production using organoleptic test procedures and our own fully trained assessment panel. We guarantee that our baseboard products Invercote, Incada and Inverform register Robinson taint values according to EN1230-2 and DIN 10955 that are below the detection limit. As an integral part of our product quality assurance policy, Holmen Iggesund accepts responsibility for taint and odour problems proven to have been caused by our products.

Product labelling

Presently there are several labelling schemes on the market that claim to communicate representative facts about product performance and environmental acceptability (eco-labels), such as EU Ecolabel and Cradle to Cradle. A selected number of our grades fulfil the requirements of Nordic Ecolabel for printing companies.

Environmental Declaration

The international development of Environmental Product Declarations is promising, but until these are developed and become an accepted standard, reference is made to the Holmen Iggesund environmental declarations which are available upon request or can be downloaded from iggesund.com/certificates.

Product safety and liability

The essence of packaging is to ensure the quality, hygiene and safety of the packed product. To ensure these, a number of national and international rules and regulations must be met. In addition, company and product-specific measures are usually added. The final goal is to secure fitness for the intended use. It is important to protect the packed product against contamination from various external factors. Holmen Iggesund products are therefore, made only from high quality primary fibres and functional additives which ensure safety, hygiene and good organoleptic properties of the products. Where necessary, additional barrier materials can be applied to ensure that the quality of a packed product can be safely maintained.

In many countries, consumer safety is protected by product liability legislation with far-reaching consequences for the supply chain. In the event of damage, all players along the supply chain are responsible to the consumer (joint and separate responsibility). The only exception is when you can prove, for your own area of responsibility, the fulfilment of the relevant requirements. A key consequence is thus to ensure the complete understanding and verification between supplier and customer of all the relevant aspects.

Declaration of compliance

Holmen Iggesund will, upon request, issue a product declaration to verify the fitness and safety of a product for the intended use. In order to create the document, a customer must provide the specific conditions of the intended use of the Holmen Iggesund product. Communication along the supply chain is of decisive importance for the result of the correct and appropriate compliance work in relation to the actual end-use application, The declarations of compliance are issued after having carefully checked that the intended use of a specific paperboard product, under specified conditions of use, will not endanger the quality and safety of the packed product. The specific statements in the declaration are integral parts of the Holmen Iggesund Management System. The information provided is valid for two years.

Food safety, rules and regulations

All Holmen Iggesund products will, subject to application/intended use, fulfil the requirements listed below:

For certain geographical areas or specific end uses, certain requirements must be met or enhanced barrier functions could be needed. For instance, a barrier between the board and the packed foodstuffs is recommended when the board is used for fatty or aqueous packaging applications. Holmen Iggesund will ensure that the appropriate product/barrier combinations fulfil the requirements for the defined intended use. Barrier functions are generally achieved by plastic coating.

The plastic itself, in all plastic coatings, meets the requirements of the Commission Regulation (EU) 10/2011 and its subsequent amendments. For plastic coating/lamination, only raw materials which are suitable for the specific application are used. Analysis of total migration tests are regularly made to verify compliance.

Good manufacturing practise

The Commission Regulation (EC) No 2023/2006 on good manufacturing practice for materials and articles intended to come into contact with food lays down rules on good manufacturing practice. The main requirement in this regulation is that we as a manufacturer shall operate an effective food safety management system in our manufacturing process.

Holmen Iggesund has Food Safety System Certification (FSSC 22000 v5.1) for Food Packaging and Packaging Material (Category: I) in place. The certification scheme for food safety management systems consists of the following elements: ISO 22000:2018, ISO/TS 22002-4:2013 and additional FSSC 22000 requirements (version 5.1). The certificate is applicable for the scope of board production, finishing, coating/lamination to be used in the food industry.

The EU Directive on Packaging and Packaging Waste (94/62/EC)

The EU Directive (94/62/EC) is aimed at minimising the environmental impact of packaging and packaging waste. It places an obligation on prevention by source reduction, re-use or recovery of used packaging and minimisation of heavy metal contamination. The EU Commission gave the European Standards Organisation, CEN, a mandate to develop standards to be used as EU harmonised standards to ensure the fulfilment of the essential requirements. During 2004 CEN adopted and published the following standards: EN 13427:2004, EN 13428:2004, EN 13429:2004, EN 13430:2004 and EN 13431:2004. EN 13432:2000 was already published.

In general the following is valid for Holmen Iggesund products:

Holmen Iggesund will act to meet all the relevant requirements of the directive, and will use the previously mentioned CEN packaging standards to assess and document compliance with the essential requirements. EN 13427:2004 is called “the umbrella standard” which guides users through the texts, indicating which standards are applicable to each type of packaging. EN 13428:2004 consists of two parts of which the first covers “prevention by source reduction”, and the second “qualitative prevention by minimising the presence of noxious and hazardous substances in the packaging material”.

In the areas of product development, marketing, sales and technical service, fitness for intended use is given priority to ensure that the main purposes and functions are fulfilled with a minimum of material. In the area of transport packaging the demand for prevention by source reduction is applicable and fulfilled by supplier requirements as defined in the standard.

All products meet the requirements regarding determination and minimisation of noxious and hazardous substances. EN 13429:2004 regarding reusable packaging is not applicable for our products. Product design and composition is such that material recycling (EN 13430:2004) or energy recovery (EN 13431:2004) can be done without limitation. Our baseboards are intrinsically biodegradable. For the quantification regarding composting, tests should be made on the final packaging after the converting process (EN 13432:2000).